
Product Introduction:
A two-component rust-proof paint composed of epoxy resin, polyamide, mica iron oxide, and solvents.
Physical Parameters
Technical Indicators |
||
Test Item |
Unit |
Index |
Coating Appearance |
— |
Normal coating appearance |
State in Container |
— |
After stirring and mixing, there are no hard lumps, and it is in a uniform state. |
Color |
— |
Gray |
Gloss |
— |
Matt |
Drying Surface Dry |
h |
≤4 |
Time Through Dry |
h |
≤24 |
Solid Content |
— |
56% |
Flash Point |
℃ |
27℃ |
Impact Strength |
kg/cm2 |
50 |
Dry Film Thickness |
µm |
40 |
Application Areas:
As an intermediate paint layer in a high-performance anticorrosion system to enhance the interlayer adhesion and shielding protection performance of the entire coating; as a sealing coating for metal zinc-sprayed layers on steel or galvanized steel surfaces, it can also be directly applied to sandblasted steel surfaces as a rust-proof paint.
Main Characteristics:
Excellent adhesion and sealing performance on zinc-rich primers and zinc-sprayed layers of steel.
Low permeability of water vapor and oxygen to the coating, with excellent water resistance and good corrosion resistance.
Excellent wear resistance and durability.
Good weather resistance in industrial and chemical atmospheric environments.
The coating can maintain excellent impact resistance and flexibility over a long period of time.
Good interlayer adhesion with subsequent coatings.
Packaging and Storage:
Packaging and storage according to national regulations. The storage environment should be dry, cool, and well-ventilated, avoiding high temperatures and keeping away from fire sources. The packaging containers must be kept sealed. The effective storage period is 12 months.
Precautions
When the substrate temperature is below 5℃ during outdoor construction, the curing reaction of components A and B slows down or stops, and construction is not recommended.
Health and Safety
Please pay attention to the warning signs on the packaging container. Use in a well-ventilated environment. Do not inhale paint mist and avoid skin contact. If paint splashes on the skin, immediately wash with a suitable detergent, soap, and water. If it splashes into the eyes, rinse thoroughly with water and seek immediate medical attention.
Declaration
The information provided in this product specification is entirely based on our understanding gained from laboratory and practical experience. However, since the use of the product is usually beyond our control, we only guarantee the quality of the product itself. We reserve the right to modify this specification without prior notice.

Cold spray zinc sealant
Contact Us
Belonging Category
Related Products
Product Inquiry