Two-component waterborne polyurethane topcoat
Product Features
Free of TDI; full film, high gloss, bright color; good adhesion, high hardness, good yellowing resistance, and anti-blocking; fast drying, easy to apply High hardness, yellowing resistance, and good anti-blocking properties; fast drying and easy application Requires matching water-based epoxy primer, using spray or brush application
Room temperature (25℃) self-drying single-spray application. Wet film thickness should not exceed 275 um , Dry film thickness should not exceed 70 um
High-temperature (80℃) baking single-spray application. Wet film thickness should not exceed 250 um , Dry film thickness should not exceed 70 um
Theoretical coating rate 7-8m'/ kg / Single pass;
The actual coating rate should consider an appropriate loss factor
Coating methods Airless spraying, air spraying, brushing, roller coating
Technical Parameters
Item
|
Performance Parameters
|
Reference Standard
|
|
State in Container
|
Liquid and pulp, after mixing, should be free of lumps and uniform
|
Item Measurement
|
|
Non-volatile content %≥
|
45
|
GB/T 1725-2007
|
|
Pot life/h
|
2
|
-----
|
|
Workability
|
Easy to apply
|
-----
|
|
Film Appearance
|
Normal film appearance
|
Item Measurement
|
|
Drying Time
|
Surface dry ≤
|
2
|
GB/T 1728-1979
|
Through dry ≤
|
24
|
GB/T 1728-1979
|
|
Impact resistance/kg ·cm
|
50
|
GB/T 1732-1993
|
|
Pencil hardness ≥
|
H |
GB/T 6793-1996
|
|
Artificial aging test ≥ matching (primer + topcoat)
|
1200h The film does not bubble, peel, or powder, slight discoloration is allowed |
GB 1865-80
|
|
Salt spray resistance h matching (primer + topcoat)
|
1000h unidirectional rusting of scribed lines not exceeding 2mm, no change in unscribed areas |
GB/T 1771-2007
|
|
Coating Data
Color
|
Gloss
|
Typical Thickness
|
Dry film
|
||||
Various colors
|
Glossy
|
30-40 microns
|
One Excessive single coat thickness will lead to film defects
|
||||
Anti-sagging
|
Water dilution
|
5
|
10
|
15
|
20
|
||
|
Maximum thickness
|
200
|
150
|
125
|
100
|
||
Drying Time
Temperature
|
10℃
|
20℃
|
30℃
|
Surface dry
|
2.5 hours
|
1.5 hours
|
50 minutes
|
Hard dry
|
30 hours
|
18 hours
|
12 hours
|
Coating Time
Temperature
|
10℃
|
20℃
|
30℃
|
Shortest
|
2 4 Small Time
|
18 hours
|
12 hours
|
Mixed pot life
Temperature
|
10℃
|
20℃
|
30℃
|
Pot life
|
≤2 hours
|
≤1.5 hours
|
≤1 hour
|
Safety Data
This product is a water-based environmentally friendly paint, non-toxic, odorless, non-combustible, and non-explosive.
Surface Treatment
All surfaces to be coated should be clean, dry, and free of contamination. All surfaces should be evaluated and treated according to ISO 8504:1992 standard. Surfaces using pre-coated primers should always be coated with the recommended primer above, the bottom The primer surface should be dry and clean Dyeing, necessary marking of areas with peeling and damage on the undercoated surface Standard processing, weld seams and damaged areas should be sandblasted. If the shop primer has extensive peeling, then comprehensive sandblasting is required.
Construction Instructions
This product is packaged in two cans, forming one unit. Each time, it must be mixed according to the specified ratio, paired and mixed once, and used up within the specified mixing and use period.
1. Stir the base material with a power stirrer.
2. Mix all the curing agent and base material together, using power stirrer thoroughly stir.
Cleaning
Clean all equipment immediately with tap water after use. Do not use solvent type thinner for cleaning.
Water-based polyurethane paint
Contact Us
Belonging Category
Product Inquiry
Official Account
Contact Us
Manufacturer: Liaoning Maiqi New Materials Group Co., Ltd. (Factory Code L)
Address: Liaoning Province, Tie Ling City, Diaobingshan City, South City Development Zone, Liaohe Street
Tel:024-76751111/024-77700777
Manufacturer: Maiqi (Henan) New Materials Co., Ltd. (Factory Code H)
Address: Henan Province, Changyuan City, Pub Bei Office, Dongting Lake Road No. 7
Tel:0373-8862077
Manufacturer: Maiqi (Xinjiang) New Materials Co., Ltd. (Factory Code X)
Address: Xinjiang Wujiaqu City, Wutong Phoenix North Road, Qianjin Branch Road No. 11
Website: www.maiqipaint.com
Email:maiqipaint@163.com