Epoxy floor sealing primer
+
  • Epoxy floor sealing primer

Epoxy Primer
  Product Introduction:
  Epoxy floor primer is a two-component system consisting of epoxy resin, solvent, and auxiliary agents (Component A), and curing agent and solvent (Component B).
  Physical Parameters:

Test Item

★State in Container

Should be free of lumps after stirring.

★Solid Content (after mixing), %, ≥

35

★Fineness, μm ≤

--

Applicable Period, h ≥

2

Workability

Unhindered construction

★Drying Time, h ≤

Surface Dry

3

★Drying Time, h ≤

Through Dry

24

★Viscosity s ≥

15+5 (涂-4) Original Paint Measurement

Impact Resistance cm

--

Pencil Hardness (Scratch) ≥

--


  Application Areas:
  Used as a sealing primer on surfaces of concrete, wood, terrazzo, steel, and other substrates.
  Main Characteristics:
  ♦Odorless, high hardness, high permeability, acid and alkali resistance
  ♦High hardness, reaching 2H
  ♦Color stability: No color separation during construction
  ♦Good leveling: Roller coating without roller marks, brush coating without brush marks
  ♦Cost-effective, mainly used for cement floors
  Construction Method:
  1. Substrate requirements: Grinding, cleaning, and repair;
  2. If the basic surface humidity >15%, construction must be stopped until the surface humidity <10%; otherwise, bubbling may occur;
  3. Operational requirements: Add B component according to the ratio, stir for about 3 minutes, then apply evenly with a roller or trowel to obtain a smooth and even surface coating;
  4. Usage time limit: This product can be used for about 45 minutes at room temperature. Please determine the batching quantity for each batch according to the actual construction progress. The mixed materials must be used up at once, and the remaining A and B materials must be sealed and stored;
  Packaging and Storage:
  Packaged and stored according to national regulations. The storage environment should be dry, cool, and well-ventilated, avoiding high temperatures and keeping away from fire sources. The packaging container must remain sealed. The effective storage period is 12 months.
  Packaging Specifications: 25kg/set
  Precautions:
  Outdoor construction should not be carried out when the substrate temperature is below 5℃, as the curing reaction of components A/B will slow down or stop.
  Health and Safety:
  Please pay attention to the warning signs on the packaging container. Use in a well-ventilated environment. Do not inhale paint mist and avoid skin contact. If paint splashes on the skin, immediately wash with a suitable cleaning agent, soap, and water. If paint splashes into the eyes, rinse thoroughly with water and seek immediate medical attention.
  Declaration
  The information provided in this product specification is entirely based on our knowledge gained in the laboratory and practice. However, since the use of the product is usually beyond our control, we only guarantee the quality of the product itself. We reserve the right to modify this specification without prior notice.
  本产品说明书中提供的信息完全基于我们在实验室和实践中所获得的认识。但由于产品的使用通常都是在我们控制范围之外,所以我们只给予产品本身质量的保证。我们保留不预先通知而修改该说明书的权利。

Product Inquiry

Note: We will contact you within one business day. Please pay attention to your email.

Security verification
Submit Now